Sdcp Installation; Installing A Carrier Without Threaded Screw Holes - Paradyne Compshere 3000 Series Installation Manual

Carrier
Hide thumbs Also See for Compshere 3000 Series:
Table of Contents

Advertisement

COMSPHERE 3000 Series Carrier
Installing a Carrier Without
Threaded Screw Holes
"
Procedure
1. Position the carrier in the cabinet and determine
the front rail holes to be used.
2. Slip a self-retaining nut (Speed Nut) onto each rail
hole selected and align the hole of the nut with the
hole in the rail.
3. Line the carrier mounting bracket up with the
self-retaining nut, and turn the screw into the
carrier mounting bracket and the nut. Start all four
screws, then tighten all four until each screw head
is flush with the carrier and the carrier is securely
mounted in the cabinet.
Front Rail
7th Hole
Front of 19-inch Carrier Cabinet
4. Install the next carrier in the same manner (from
the bottom up) using Steps 1 through 3.
3-6
Mounting
Bracket
Speed Nut
Screw
Keyhole
496-12294a-02
July 1999

SDCP Installation

An SDCP can control up to eight carriers containing:
Up to 128 compatible T1 CSUs, T1 DSU/CSUs,
DSUs, or dial/lease modems, or
A reduced number when TDMs, MCMPs, DBMs,
or dial/lease multiport modems are also installed.
Carrier Slots 1–16
SDU
1
2
3
4
5
6
7
Select
OK Alarm BckUp Test
EC
Select
Status
Indicators
Key
If your configuration has two or more carriers, an SDU
is also required in each carrier to connect the SDCP
interface from carrier to carrier. Refer to the
Installation
section, page 3-16.
The following table defines the SDCP status indicators.
Label
Color
OK
green
Health and status indicator for the
selected device. Mirrors the OK
indicator on the faceplate, except for
dial/lease modems, where OK
replaces the power indicator.
Alarm
red
Health and status indicator for the
selected device. Mirrors the Alrm
indicator.
BckUp
yellow
Mirrors the Dial indicator on the
selected device. Not used for
T1 CSUs and T1 DSU/CSUs.
Test
yellow
Mirrors the Test indicator on the
selected device.
EC
green
Error Correction indicator for dial/
lease modems. Not applicable for
other devices.
8
9
10
11
12
13
14
15
16
COMSPHERE 3000
F1
F2
F3
Keypad
LCD
Display
496-12348a-03
SDU
Description
3000-A2-GA31-D0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Comsphere 3000 series

Table of Contents