Customer Cable Connection - Siemens SITRANS TDL Compact Operating Instructions

11. When the installation is complete, the assembly should look like on the following figure.
6.2.5

Customer cable connection

Separate electrical cable is connected via power supply and I/O cable gland for powering the
analyzer and communication with the customer. Please use the cable with 0.5 mm
wires and external diameter between 7 to 12 mm (0.3 to 0.5 in) to fit into the gland. Cable
supplied by Siemens is preferred.
Please follow the step-by-step instruction for correct installation.
SITRANS TDL
Compact Operating Instructions, 05\2023, A5E51659183-AA – revised 03/2024
Close the receiver unit lid.
Completed loop cable installation
① Grounding point
Connecting
6.2 Connecting SITRANS TDL
(10 AWG)
2
35