Disassembly - Siemens SITRANS TDL Compact Operating Instructions

In situ laser gas analyzers

Hide thumbs Also See for SITRANS TDL:

Table of Contents

5. Tighten the connec-

6. Mount the emitter unit. Follow the same procedure as for the receiver.

7. The system is now prepared for electrical connection.

5.4

Disassembly

Note

Correct disassembly

For correct disassembly, complete the installing and mounting steps in reverse order.

Incorrect disassembly

The following risks may result from incorrect disassembly:

- Injury through electric shock

- Risk through emerging media when connected to the process

In order to disassemble correctly, observe the following:

• Before starting work, make sure that you have switched off all physical variables such as

• If the device contains hazardous media, it must be emptied prior to disassembly. Make

• Secure the remaining connections so that no damage can result if the process is started

SITRANS TDL

Compact Operating Instructions, 05\2023, A5E51659183-AA – revised 03/2024

tion using the clamp

screw.

Connection with the clamp screw

WARNING

pressure, temperature, electricity etc. or that they have a harmless value.

sure that no environmentally hazardous media are released.

unintentionally.

Installing/mounting

5.4 Disassembly

Table of Contents