Disassembly - Siemens SITRANS F MASS 2100 Operating Instructions Manual

Lack of proper sealing
Soft metal sealing rings only maintain a hermetic seal within the enclosure with single use.
• Ensure that soft metal sealing rings are not reused.
Operation in proximity with pressure guards
Prevent personal injuries by assuring that operation in close proximity with pressure guards
cannot take place.
4.3

Disassembly

Pressure applications
Danger to personnel, system and environment will result from improper disassembly.
• Never attempt to loosen, remove, or disassemble process connection while vessel contents
Incorrect disassembly
The following risks may result from incorrect disassembly:
- Injury through electric shock
- Risk through emerging media when connected to the process
- Risk of explosion in hazardous area
In order to disassemble correctly, observe the following:
• Before starting work, make sure that you have switched off all physical variables such as
• If the device contains hazardous media, it must be emptied prior to disassembly. Make sure
• Secure the remaining connections so that no damage can result if the process is started
SITRANS MASS 2100 & FC300 (FCT010/DSL)
Operating Instructions, 06/2020, A5E39788682-AB
CAUTION
WARNING
DANGER
are under pressure.
WARNING
pressure, temperature, electricity etc. or that they have a harmless value.
that no environmentally hazardous media are released.
unintentionally.
Installing/mounting
4.3 Disassembly
39