Installing/mounting
4.1
Basic safety notes
4.1.1
Incorrect disassembly
Incorrect disassembly
The following risks may result from incorrect disassembly:
- Injury through electric shock
- Risk through emerging media when connected to the process
- Risk of explosion in hazardous area
In order to disassemble correctly, observe the following:
• Before starting work, make sure that you have switched off all physical variables such
• If the device contains hazardous media, it must be emptied prior to disassembly. Make
• Secure the remaining connections so that no damage can result if the process is started
Pressure applications
Danger to personnel, system and environment will result from improper disassembly.
• Never attempt to loosen, remove, or disassemble process connection while vessel
Note
Product designation
This product is designated as a Pressure Accessory per Directive 2014/68/EU and is not
intended for use as a safety device.
18
WARNING
as pressure, temperature, electricity etc. or that they have a harmless value.
sure that no environmentally hazardous media are released.
unintentionally.
DANGER
contents are under pressure.
SITRANS Probe LR with mA/HART
Operating Instructions, 05/2019, A5E32337711-AC
4