Configuring The Lan; Enable/Disable Dhcp - Paradyne 6210 User Manual

Configuring the LAN

To configure LAN parameters, click on Setup on the Home screen. Under LAN
Setup, click on LAN Configuration. The LAN Configuration screen appears.
Figure 3-10. LAN Configuration Screen
By default, both the Ethernet port and USB port are in LAN Group 1. The USB port
may be removed from LAN Group 1 and added to LAN Group 2 for separate
configuration.

Enable/Disable DHCP

By default, the router has DHCP server (LAN side) disabled. If you already have a
DHCP server running on your network, do not enable the router's DHCP server.
To enable DHCP:
Procedure
6210-A2-GB23-00
1. From the Home screen, click on Setup.
2. Under LAN Setup, select LAN Configuration. This will bring up the screen
shown in Figure 3-10, LAN Configuration
3. Click on the Configure link in the LAN Group 1 window. The LAN Group 1
Configuration screen appears.
January 2005
3. Using the Web Interface
Screen.
3-15