Windows 2000 - Paradyne 6210 User Manual

2. Hardware Installation and PC Setup
Figure 2-9.

Windows 2000

To configure the IP address under Windows 2000:
Procedure
2-8
5. In the Internet Protocol (TCP/IP) Properties dialog box, click in the radio button
labeled "Use the following IP address" and type 192.168.1.x (where x is any
number between 2 and 254) in the IP Address field. Type 255.255.255.0 in the
Subnet Mask field.
TCP/IP Properties in Windows XP
6. Click on OK twice to confirm your changes, and close the Control Panel.
1. In the Windows task bar, click on the Start button, point to Settings, and then
select Control Panel.
2. Double-click on the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click on the Local Area
Connection icon, and then select Properties.
The Local Area Connection Properties dialog box is displayed with a list of
currently installed network components. If the list includes Internet Protocol
(TCP/IP), the protocol has already been enabled, in which case you can skip
to Step 10.
January 2005 6210-A2-GB23-00