Modify An Existing Connection; Modem Setup - Paradyne 6210 User Manual

To complete the connection you must now click the Apply button. The Apply button
will temporarily save this connection. To make the change permanent, click on
Tools (at the top of the page) and select System Commands. At the System
Commands page, click on Save All.

Modify an Existing Connection

To modify an existing connection:
Procedure
If you delete a connection, to make the change permanent: Click on Tools (at the
top of the page) and select System Commands. At the System Commands page,
click on Save All.

Modem Setup

To configure the DSL modulation type:
Procedure
The Apply button will temporarily save these settings. To make the change
permanent, click on Tools (at the top of the page) and select System Commands.
At the System Commands page, click on Save All.
6210-A2-GB23-00
1. From the Home screen, click on Setup.
2. Click on the connection you want to modify. The connections are listed on the
left by name.
1. From the Home screen, click on Setup.
2. Under WAN Setup, select Modem Setup. This will bring up the Modem Setup
screen. Leave the default values if your ISP did not provide this information.
For most cases, this screen should not be modified.
January 2005
3. Using the Web Interface
3-13