Configuring Lan Hardware Parameters - Paradyne COMSPHERE 6700 SERIES Network Configuration Manual

Custom Network Interface Settings
Table 5-1. Custom Window Fields (2 of 2)
IP
Domain
Configuring LAN Hardware
Parameters
Use Hardware... to select and configure the following
hardware-related parameters for Ethernet, Token Ring, or FDDI
networks:
Vendor
Board Type
Procedure
1. Choose Settings... from the Network menu. The
Custom window appears, as shown in Figure 5-1.
2. Choose Setup from the Custom window menu bar.
3. Choose Hardware... from the Setup menu. The
Hardware dialog box appears, as shown in Figure 5-2.
Internet Protocol address (home address) for the
workstation.
Not required.
Issue 2 December 1996
5-3