Tools; System Commands - Paradyne 6210 User Manual

3. Using the Web Interface

Tools

The Tools tab provides access to system commands and functions.

System Commands

To make changes permanent, click on Tools (at the top of the page) and select
System Commands. The following commands are used to configure the modem:
Figure 3-24. System Commands
3-30
Save all: Press this button in order to permanently save the current
configuration of the modem. If you do restart the system without saving your
configuration, the CPE will revert back to the previously saved configuration.
Restart: Use this button to restart the system. If you have not saved your
configurations, the modem will revert to the previously saved configuration
upon restarting. Connectivity to the unit will be lost. You can reconnect after
the unit reboots.
Restore Defaults: Use this button to restore factory default configuration.
Connectivity to the unit will be lost. You can reconnect after the unit reboots.
January 2005 6210-A2-GB23-00