Paradyne 6211 Quick Installation Instructions

6211-I1 ADSL2+ Router
Quick Installation Instructions
Document Number 6211-A2-GZ10-10
December 2004
Installation
1. Connect your ADSL line to the port labeled LINE on the rear
panel of the device.
2. For routers with a phone port, optionally connect your
telephone to the port labeled PHONE.
3. Connect your PC or a LAN:
— Use the supplied Ethernet cable to connect your PC
directly to the router. Connect one end of the Ethernet
cable to the port labeled LAN on the router and connect
the other end to the Ethernet port of your computer.
— Alternatively, use the supplied USB cable to connect your
PC directly to the router. Connect one end of the USB
cable to the port labeled USB on the router and connect
the other end to a free USB port on your PC. Install the
USB drivers as described in the user's guide on the CD.
— If your LAN has more than one computer, you can attach
one end of an Ethernet cable to a hub or a switch and the
other to the LAN port of the router. Either a crossover or
straight-through Ethernet cable can be used.
4. Connect the AC power adapter to the POWER connector on
the back of the device and plug the adapter into a wall outlet or
power strip.
See the user's guide on the CD for important safety instructions and more information.
Copyright © 2004 Paradyne Corporation.
*6211-A2-GZ10-10*
*6211-A2-GZ10-10*