Firewall/Nat Services - Paradyne 6210 User Manual

3. Using the Web Interface

Firewall/NAT Services

To enable or disable Firewall and NAT:
Procedure
Figure 3-12. Firewall/NAT Services Screen
The Apply button will temporarily save this setting. To make the change
permanent, click on Tools (at the top of the page) and select System Commands.
At the System Commands page, click on Save All.
3-18
1. From the Home screen, click Setup.
2. Under LAN Setup, select Firewall/NAT Services. By unselecting the Enable
Firewall and NAT Services button the firewall and NAT services is disabled for
all WAN connections. Enabling Firewall NAT does not automatically apply it to
connections.
January 2005 6210-A2-GB23-00