Home And Status Screens Icon Descriptions - Lennox S40 User Manual

Home and Status Screens Icon Descriptions

Function or
Icon
Screen Text
Menu
1
Menu with
Notification
Icon
Feels Like™
is Active or
Turning Feels
Like™ on
Smart Away is
Active or Away
is Active
Heating
Cooling
Humidifying
Dehumidifying
Table 2. Home and Status Screens Icon Descriptions
Select this icon to prompt the user and installer menus.
If there are one or more notifications this icon will appear over the menu icon. The number in the center indicates how
many active notifications are present.
Optimizes and automates factors that affect comfort (including heating, cooling, and humidity) and creates the ideal
environment. It's very similar to the "feels like" temperature on a weather report. If the "Feels Like™" feature is enabled,
Feels Like™ displays below the system name on the Home screen.
When the Away icon is selected, the system will automatically use energy saving settings - heat-to 62 (16.5) and cool-
to 85 (29.5). Temperatures can be adjusted by pressing the available temperature setting (i.e., heat-to or cool-to). To
exit Away, press the Cancel icon. In a zoning system, all zones are set to a single heat-to and cool-too setting. Note
that when manually selecting Away from the Home screen, the Smart Away feature (if enabled under settings) will be
temporarily disabled until Away is canceled.
System is heating the home. This animated icon will appear above the system name on the Home screen.
System is cooling the home. This animated icon will appear above the system name on the Home screen.
If humidification equipment is installed and configured, the system will display this message when adding humidity to the
air in the home.
The system can be used in cooling mode to help remove excessive humidity as determined by the user setting. Go to
Menu > Settings > Humidity > and turn on dehumidify. Then adjust the acceptable low and high humidity levels in the
home with the dehumidification set-point slider.
Purpose
19