Adding System To Consumer Account; Removing System From Your Consumer Portal Account; Remove Home; Move Out - Lennox iComfort S30 Smart Thermostat Operating, Troubleshooting And Technical Cheat Sheet

D. Check the if you agree to the Lennox EULA.
E. Select sign up. A pop-up will appear indicating you have successfully created your account. Select OK to
continue.
F. Creation of account is completed.

6.2. Adding System to Consumer Account

A. Login into the consumer portal.
B. From my homes screen, select the email address located in the upper right hand corner of the screen.
C. An option to add icomfort is available. Select icomfort and enter the pin number for the applicable system locat­
ed in the home. A pin number can be created from the HD Display. From the home screen, go to menu > settings
> account and select generate pin number.
D. Enter the pin number and press add.
E. Complete the information under the add icomfort screen (home name, country, address, city, state and zip code.
Once completed, press done to continue.
NOTE - If there are multiple systems in the home, then the home name must be unique for each system
added to the consumer portal account.
F. Your system should appear momentary on the consumer portal screen.

7. Removing System from your Consumer Portal Account

A system can be removed using either the Consumer Portal or directly from the HD Display. There are two methods that are
available to remove the system, either remove home or move out:
NOTE - If you have given your dealer remote in access, they will no longer be able to remotely access your system.

7.1. Remove Home

A. Go to the consumer portal website or to the HD display that controls the system to be removed.
B. Go to menu > settings > home info and select remove home.
C. A critical warning notification will appears confirming the action, press yes to remove the home (system).

7.2. Move Out

In firmware version 3.0, this feature works exactly like the remove home selection.
NOTE - If you have given your dealer remote in access, they will no longer be able to remotely access
your system.
A. Go to the consumer portal website or to the HD display that controls the system to be removed.
B. Go to menu > settings > account and select move out.
C. A critical warning notification will appears confirming the action, press yes to remove the home (system).
- 15 -