Sony DVCAM DSR-1800 Operating Instructions Manual page 95

Monitor problems
superimposed on the
this unit.
The 75 Q termination switch for video
input on the monitor is in the OFF
position, or a 75 Q terminator is not
fitted to its video input connector.
The image on the
monitor screen is too
bright.
The image on the
monitor screen is too
dark.
The image is too dark
when recording a
composite video
signal.
Audio problem
s
a
(a
In a video signal loop-through
connection of video monitors, 75 Q
termination switches for video input on
monitors other than the loop-end
monitor are in the ON position.
LEVEL control knobs
do not work.
To be able to perform this operation, it is necessary to set the
MENU GRADE menu item (see page 66) to ENHANCED.
The REC LEVEL menu item is set to
PRESET.
Editing restriction
erases subcode data
(user bit data, etc.)
recorded on tape other
than time code data.
Troubleshooting
nnn
Buncoyseqnol, pue eoueuajueyW 9g Je}deyg
95