Sony DVCAM DSR-1800 Operating Instructions Manual page 74

mI
sBuijes nuey p seydeyp
74
Displaying
Supplementary Status
Information
When you set the SUB STATUS menu item (see page 59)
to other than OFF, you can view supplementary status
information on the monitor screen below the operating
mode display area.
T}clR] fofo]: [ols]. [a[7] fol7] |
Pty feielayy] | TT [efole] xy |
Supplementary status information
The following items of supplementary status information
are displayed depending on the setting of the SUB
STATUS menu item.
Setting of SUB Items of supplementary
STATUS menu item _{ information displayed
EDIT PRESET Editing mode settings made on the
editing contro! unit
TC MODE Operating mode of the internal time
code generator
REMAIN Remaining capacity of the tape
AUDIO MIXING Setting for input audio mixing
All of the above items
The following tables show the on-screen indications of
supplementary information and their meaning.
In each table, the indications given in brackets such as
[ASM] are the indications displayed when the SUB
STATUS menu item is set to ALL.
For the display format when ALL is selected, see page 75.
When the SUB STATUS menu item is set to EDIT PRESET:
ASM [ASM] Assemble editing mode
INS V A1234 TC INS: Insert editing mode
[V1234T] V A1234 TC: Channels or
signals selected for
insert editing
V: Video
A1234: Audio 1, 2, 3, 4
TC: Time code
Displaying Supplementary Status Information
When the SUB STATUS menu item is set to TC MODE:
On-screen Meaning
indication
INT PRESET FREE | The internal time code generator is
[IP F] operating in FREE RUN mode.
INT PRESET REC The internal time code generator is
{IP R] operating in REC RUN mode.
INT REGEN-T&U The internal time code generator is
{IRTU] in synchronization with the playbact
time code (LTC) read from tape.
The internal time code generator is
in synchronization with the externa
time code (LTC) input to the unit
and is generating the same time
code value and user bit value as
those of the external time code
(regeneration).
Thé internal time code generator is
in synchronization with VITC
present in the external video signal
input to the unit and is generating
the same time code value and user
bit value as those of the external
time code (regeneration).
The internal time code generator is
in synchronization with the external
time code input to the unit via SDT|
(QSD)I) interface and is generating
the same time code value and user
bit value as those of the external
time code (regeneration).
The internal time code generator is
in synchronization with the external
VITC input to the unit via SDT!
(QSDI) interface and is generating
the same time code value and user
bit value as those of the external
time code (regeneration).
The internal time code generator is
in synchronization with the external
time code input to the unit via i.LINK
(DV IN) interface and is generating
the same time code value and user
bit value as those of the external
time code (regeneration).
The internal time code generator is
in synchronization with the external
VITC input to the unit via i.LINK (DV
IN) interface and is generating the
same time code value and user bit
value as those of the external time
code (regeneration).
EXT LTC-T&U
[ELTU]
EXT VITC-T&U
[EVTU]
EXT QSDI-T&U
[EQTU]
EXT QSDI.V-T&U
{EQTU]
EXT DVIN-T&U
[EDTU]
EXT DVIN.V-T&U
[EDTU}
When the SUB STATUS menu item is set to REMAIN:
On-screen
indication
REMAIN 184 min
Remaining capacity of the tape in
minutes.
When the remaining capacity has
not been detected, "REMAIN ---
min" appears.