Sony DVCAM DSR-1800 Operating Instructions Manual page 31

1
f
Playback
Settings for Playback
This section describes the settings and operations necessary to perform playback
on this unit. The same settings and operations apply whether you are using the
unit as part of an editing system, for dubbing, or as a stand-alone player VCR.
For the necessary connections for playback and the settings not covered in this
section, see Chapter 5 "Connections and Settings."
Video monitor
1) Power on this unit by pressing on the | side of the POWER switch.
2 Power on the video monitor and set its switches as shown below.
75 Q termination switch ON (or attach a 75 Q terminator.)
Input switch Set according to the type of input signal from this
unit.
Playback
yoeg pue Burpiovey 2 eideud |||!) |IIIIIIII
31