Sony DVCAM DSR-1800 Operating Instructions Manual page 101

Y/C delay
K-factor
+30 IRE (+210 mV)
+30°
+100 ns
Sync: +1 s*
SC: +180°
Chroma phase
Y/C delay
System phase
Audio performance
Frequency response
Two-channel (48 kHz) mode:
20 Hz to 20 kHz +0.5 dB/—1.0 dB
Four-channel (32 kHz) mode:
20 Hz to 14.5 kHz +0.5 dB/-1.0 dB
Dynamic range More than 90 dB
Distortion (THD + N)
Less than 0.05% (48 kHz)
Input connectors
Digital signal inputs
SDTI(QSDI) IN (with optional DSBK-1802 SDTI(QSDI)
Input/Output Board installed)
BNC type, SDTI (QSDI) format (270
Mbps)
SDI IN (with optional DSBK-1801 SDI/AES/EBU Input/
Output Board installed)
BNC type (x2, active-through), Serial
Digital Interface format (270 Mbps),
SMPTE 259M/CCIR656-III
i.DV IN/OUT (with optional DSBK-1803 i.LINK/DV
Input/Output Board installed)
6-pin IEEE 1394 connector
Analog video inputs
REF. VIDEO IN
BNC type (x2, loop-through)
Black burst
0.286 V (DSR-1800) or 0.3 V (DSR-
1800P), 75 Q, negative sync
Composite sync
BNC type (x3)
Y: 1.0 Vp-p, 75 Q, negative sync
R-Y/B-Y: 0.7 Vp-p (75% color bars
for DSR-1800 or 100% color bars for
DSR-1800P), 75 Q
S VIDEOIN _ DIN 4-pin
Y: 1.0 Vp-p, 75 Q
C: 0.286 Vp-p (DSR-1800) or
0.3 Vp-p (DSR-1800P), 75 Q (burst
level)
Analog audio inputs
* Selectable on DSR-1800P only
Digital audio inputs
DIGITAL AUDIO (AES/EBU) IN (with optional DSBK-
1801 SDI/AES/EBU Input/Output Board installed)
BNC type (x2), complying with AES-
3id-1995
Time code input
TIME CODE IN
BNC type, SMPTE time code (DSR-
1800) or EBU time code (DSR-
1800P), 0.5 Vp-p to 18 Vp-p, 3.3 kQ,
unbalanced
Specifications
TIM
101