Sony DVCAM DSR-1800 Operating Instructions Manual page 38

8 Press the <=[A] button.
The display changes as follows.
Sele oliyptia Be >> REP TOP
Time counter display
Monitor screen
Ini
9 Press the (b button to select "A PRESET."
SETUP MENU
OPERATIONAL FUNCTION >> A preset
REPEAT FUNCTION : ,
REPEAT MODE "OFF Time counter display
REPEAT TOP 'A
:V.END
yoegheig pue Guipsooey =z saldeyD
Monitor screen
1 OPress the [B]=> button.
The A PRESET MODE screen appears. The time code value of the current
point A is displayed below the screen title.
p e cer RR ae LR ee
A PRESET MODE
A @0:00:00:00
INC/DEC : (4) (KEY
SHIFT : (€) (9) KEY
CLEAR : RESET KEY
DATA SAVE : SET KEY
TO MENU : MENU KEY
Monitor screen
1 1 Use the <=[A] or [B]=> button to select the digit in the time code value
display that you want to change.
Each press of the button causes the digit to the left or right to begin flashing.
Holding the button down moves the flashing digit continuously.
If you want to clear the time code value, press the RESET (NO) button. The
value is cleared to 00:00:00:00, and the leftmost digit begins flashing.
38 Playback