Sony DVCAM DSR-1800 Operating Instructions Manual page 20

ml
MA@IAIBAQ |. 1a}deUD
20
Settings of the AUDIO IN LEVEL/600 Q switches
Audio input
-60 dBu High impedance | LOW-OFF
(microphone input) (about 20 kQ) (left position)
+4/0/-3 9/-6 dBu High impedance | HIGH-OFF
(line audio input) {about 20 kQ) (middle
position)
HIGH-ON
{right position)
+4/0/-3 9-6 dBm 600 2
(line audio input)
a) Selectable on DSR-1800P only
© AUDIO IN CH-1 (channel 1) to CH-4 connectors
(XLR 3-pin, female)
Use these connectors to connect separate channels of
analog audio input from a player VCR or other external
audio equipment.
You can switch the audio input level setting with the
LEVEL SELECT menu item (see page 64).
© AUDIO OUT CH-1 (channel 1) to CH-4 connectors
(XLR 3-pin, male)
These connectors output channel-1 to channel-4 analog
audio signals, respectively.
It is possible to use the AUDIO OUT CH-3 and AUDIO
OUT CH-4 connectors for audio monitor output for
channels 1 and 2, respectively (use the OUTPUT CH3/4
menu item (see page 65)).
© AUDIO MONITOR OUT connector (RCA phono
jack)
This connector outputs audio signals for monitoring. The
audio signals to be output from this connector can be
selected with the MONITOR SELECT switches on the
menu control panel.
Location and Function of Parts
[4] External device connectors
VIDEO CONTROL ofxz)©
D VIDEO CONTROL connector
REMOTE
B REMOTE connector
@ VIDEO CONTROL connector (D-sub 15-pin)
For remote control of the internal digital video proces
connect an optional remote control unit such as the U"
60/60P or BVR-50/5OP to this connector.
@ REMOTE connector (D-sub 9-pin)
When controlling this unit from an editing control uni
such as the ES-3, ES-7, PVE-500, BVE-600/800/910/
2000, or RM-450/450CE, connect the unit to the editii
control unit via this connector using the optional 9-pir
remote control cable.