HP CX 6300 Installation And Getting Started Manual page 16

Label
4
5
6
7
8
9
10
Table 7: Front Panel LED Behavior
Switch LEDs
Back LED
PoE LED
Spd LED
Stk LED
HPE Aruba Networking CX 6300 Switch Series | Installation and Getting Started Guide
Description
Speed mode selected LED
Stk LED S
Reset button
UID (Unit Identification)
Global Status LED
Mode select button
OOBM port LED
Function
Status of modular components
installed in the back of the
chassis (not applicable for
6300F switches
Indicates Port LEDs are
showing PoE information (not
applicable for non PoE
switches)
Indicates Port LEDs are
showing speed information
Indicates Port LEDs are
showing stacking mode
information
State
On - Green Normal
Slow Flash - Amber Fault in one of the modules in
the back of the chassis
Off PoE mode not selected
On - Green PoE mode selected
Slow Flash - Amber One or more ports
experiencing PoE failure. PoE
mode not selected.
On - Amber One or more ports
experiencing PoE failure. PoE
mode selected.
Off Speed mode not selected
On - Green Speed mode selected
Not Implemented No fault defined
Off Stacking mode not selected
On - Green Stacking mode selected
On - Amber One of the switch is
experiencing stacking failure.
Port LEDs will be used to
indicate the number of the
stacking member.
Slow flash Amber A port has a stacking failure.
Stacking mode not selected
Meaning
16