Table of Contents
Advertisement
HPE Aruba Networking 6300F/M switch
Aruba 6300M 48 HPE Smart Rate Class 6 PoE
100M/1G/2.5G/5G Switch
JL659A
Aruba 6300M 24 HPE Smart Rate Class 6 PoE
100M/1G/2.5/G5G Switch
JL660A
HPE Aruba Networking 6300M 48SR10 Class 8 PoE
4p100G Switch
S0E91A
HPE Aruba Networking 6300M 48SR10 CL8 PoE 4p100G
TAA Switch
S0X44A
*These switches also support some prestandard PoE devices.
**2-Pair Power non-compliant dual signature PDs up to class 4 power . Includes 2-Pair Power legacy 802.3 af/at
with prestandard detect enabled.
For instructions on using the switch PoE features, see the Monitoring Guide for your switch.
The option to have one or two modular power supplies in the switch:
n
A second power supply supports redundant system power and/or redundant/additional PoE power. If one of
o
the modular power supplies fails, the second power supply immediately provides the power necessary to
keep the switch running, including PoE power on an allocated basis.
If maximum PoE power is used on the 48-port PoE switches, the second power supply is needed for PoE
o
power. There is no PoE power redundancy, but system power is always maintained. On a power supply
failure, the system drops the PoE power on ports based on user priority, to maintain system power.
Plug-and-play networking: All ports are enabled by default. Connect the network cables to active network devices
n
and your switched network is operational.
Auto MDI/MDI-X on all twisted-pair ports (10/100/1000), meaning that all connections can be made using
n
straight-through twisted-pair cables. Cross-over cables are not required, although they will also work. The pin
operation of each port is automatically adjusted for the attached device. If the switch detects that another switch
or hub is connected to the port, it configures the port as MDI. If the switch detects that an end node device is
connected to the port, it configures the port as MDI-X . (See the appendixes for recommended or required
cabling.)
Automatically negotiated full-duplex operation for the 10/100/1000 RJ-45 ports when connected to other auto-
n
negotiating devices. The SFP+/SFP56 ports always operate at full duplex.
Easy management of the switch through several available interfaces:
n
Console interface: A full-featured, easy-to-use, VT-100 terminal interface for out-of-band or in-band switch
o
management.
Web browser interface: An easy-to-use built-in graphical interface that can be accessed from common web
o
browsers.
Bluetooth adapter (separately orderable, SKU# S1H23A) and ArubaOS-CX Mobile App: A convenient
o
way to manage or configure your switch using your mobile device.
Aruba AirWave: A powerful and easy-to-use network operations system that manages wired and wireless
o
infrastructures. For more information, visit
https://www.arubanetworks.com/products/networking/management/airwave.
PoE per port
Up to 60W
IEEE 802.3bt
IEEE 802.3af/at**
IEEE 802.3bt
IEEE 802.3af/at**
Up to 90W
Standard
Introducing the switches |
23
Advertisement
Table of Contents
