Diagnosing with the LEDs
Table 31 shows LED patterns on the switch that indicate problem conditions for general switch operation
troubleshooting.
LED patterns for general switch troubleshooting
1. Check in the table for the LED pattern you see on your switch.
2. Refer to the corresponding diagnostic tip on the next few pages.
Table 31: LED error indicators
PS1/PS2 LEDs
Off with power
cords plugged in
1
On amber
On green
On green
On green
On green
1
Either the PS1 or PS2 LED is on amber, but not both.
Diagnostic tips:
Table 32: Diagnostic tips
Tip
Problem
1
Both switch power
supplies are not
plugged into an active
power source.
54
LED Pattern Indicating Problems
Global Status
Fan
–
Flashing amber
Flashing amber
Flashing amber
On green
On green
Solution
Verify the power source works by connecting it to another device. Or try
connecting the power supplies to different power sources or try different power
cords.
If the problem is still not resolved, both power supplies may be faulty.
Port LED
–
–
On amber
–
Flashing amber
–
Off with cable
connected
–
On, but the port is
not communicating
Aruba 8325 Switch Installation and Getting Started Guide
Diagnostic Tip
–
1
–
2
–
3
4
5
6