Table of Contents
Advertisement
Fan Condition
2 fans fault
System with no fan tray
Missing both fan
tray/all fans faulted
Fan redundancy refers to fans and not fan trays. With 2 fan trays installed, it allows 1 fan fault. With 1 fan tray, there is
no fan redundancy.
Fan tray with faulty fan/fans must be replaced with HPE Aruba Networking X751 Port to Power Fan Tray (JL669B).
For JL658A, JL659A, JL762A, R8S89A, R8S90A, R8S91A, R8S92A, S0E91A, and S0X44A:
Fan Condition
4 fans functioning
normally
1 fan fault
More than 1 fan
fault
Missing any fan
tray/all fans faulted
Power supplies
The following power supplies can be installed in the 6300M switches:
HPE Aruba Networking X371 12VDC 250W 100-240VAC Power Supply (JL085A): A 250 watt power supply for
n
the non-PoE switches. This power supply does not provide any PoE power, and is keyed so that it will not fit into
the power supply slots of HPE Aruba Networking PoE switches.
HPE Aruba Networking X371 12VDC 250W 100-240VAC Power-to-Port Power Supply (JL760A): A 250 watt
n
and back-to-front fan flow power supply for the non-PoE switches. This power supply does not provide any PoE
power and is keyed so that it will not fit into the power supply slots of HPE Aruba Networking PoE switches.
JL760A is for use only in the JL762A switch. This is the only power supply available for the JL762A switch.
HPE Aruba Networking X372 54VDC 680W 100-240VAC Power Supply (JL086A): A 680 watt power supply for
n
applicable PoE switches. Offers up to 370 watts of PoE power, and is keyed so that it will not fit into the power
supply slots of non-PoE HPE Aruba Networking switches.
HPE Aruba Networking X372 54VDC 1050W 110-240VAC Power Supply (JL087A): A 1050 watt power supply
n
for applicable PoE switches. Offers up to 740 watts of PoE power, and is keyed so that it will not fit into the power
supply slots of non-PoE HPE Aruba Networking switches.
HPE Aruba Networking CX 6300 Switch Series | Installation and Getting Started Guide
Fan Speed
N/A
N/A
Fan Speed
Accordingly to ambient and
component temperature
Remaining fans will spin with
Max speed
Remaining fans will spin with
Max speed
N/A
Fan Redundancy
Shutdown
Not supported
Upon detection, system will be
shut down in 3 minutes or
component hits thermal limit
Not supported
Upon detection, system will be
shut down in 3 minutes or
component hits thermal limit.
Fan Redundancy
Shutdown
N+1
Component hits thermal limit
Not supported
Component hits thermal limit
Not supported
Upon detection, system will be
shut down in 3 minutes or
component hits thermal limit.
Not supported
Upon detection, system will be
shut down in 3 minutes or
component hits thermal limit.
20
Advertisement
Table of Contents
