Table of Contents
Advertisement
+
ENVIRONMENTAL NOTE Environmental
pollution caused by environmentally irre-
sponsible disposal
Tire sealant contains pollutants.
Have the tire sealant bottle disposed of
#
professionally, e.g. at an authorized
Mercedes-Benz Center.
Stow the tire sealant bottle and the tire infla-
#
tion compressor.
Pull away immediately.
#
Pull over after approximately ten minutes and
#
check the tire pressure using the tire inflation
compressor.
The tire pressure must now be at least
130 kPa (1.3 bar/19 psi).
& WARNING Risk of accident due to the
specified tire pressure not being attained
If the specified tire pressure is not reached,
the tire is too badly damaged. The tire sealant
cannot repair the tire in this instance.
The braking and driving characteristics may be
greatly impaired.
Do not continue driving.
#
Consult a qualified specialist workshop.
#
In cases such as the one mentioned above, con-
tact an authorized Mercedes-Benz Center. Or call
1-800-FOR-MERCedes (in the USA) or
1-800-387-0100 (in Canada).
Correct the tire pressure if it is still at least
#
130 kPa (1.3 bar/19 psi). See the Tire and
Loading Information placard on the B‑pillar on
the driver's side or the tire pressure table on
the fuel filler flap for values.
Increasing the tire pressure
Switch on the tire inflation compressor.
#
Reducing the tire pressure
Remove the tire sealant bottle from the tire
#
inflation compressor.
Insert the filling hose in the socket of the tire
#
inflation compressor and turn it a quarter turn
clockwise.
Breakdown assistance 311
Press pressure release button
C
#
manometer B.
If the tire pressure is correct
Unscrew the filling hose from the valve of the
#
sealed tire.
Screw the valve cap onto the valve of the
#
sealed tire.
Stow the tire sealant bottle and the tire infla-
#
tion compressor.
Drive to the nearest qualified specialist work-
#
shop and have the tire, tire sealant bottle and
filling hose replaced there.
next to
Advertisement
Table of Contents
