Table of Contents
Advertisement
resting against the seat backrest of the rear
seat.
The child restraint system must not be put
#
under strain between the roof and the seat
cushion and/or be installed facing the wrong
direction. Where possible, adjust the seat
cushion inclination accordingly.
Adjust the vehicle head restraints so that the
#
child restraint system is not put under strain
by the head restraint.
Make sure that the child's feet do not touch
#
the front seat. If necessary, move the front
seat slightly forwards.
7 Depending on the vehicle equipment,
always observe the following when installing a
belt-secured child restraint system on the front
passenger seat:
Observe the notes on rearward-facing and
#
forward-facing child restraint systems on the
front passenger seat (
page 59).
/
When using a forward-facing child restraint
#
system with integrated child seat belt: remove
the head restraint from the respective seat, if
possible. After the child restraint system has
been removed, immediately replace the head
restraint and adjust correctly.
The backrest of a forward-facing child
#
restraint system must, as far as possible, be
resting on the seat backrest of the front
passenger seat.
The child restraint system must not be put
#
under strain between the roof and the seat
cushion and/or be installed facing the wrong
direction.
Adjust the vehicle head restraints so that the
#
child restraint system is not put under strain
by the head restraint.
Never place objects (e.g. cushions) under or
#
behind the child restraint system.
Set the front passenger seat as far back as
#
possible and move the seat into the highest
position if possible. Always make sure that the
shoulder belt strap is correctly routed from
the seat belt outlet of the vehicle to the shoul-
der belt guide on the child restraint system.
The shoulder belt strap must be routed for-
wards from the seat belt outlet and, where
Children in the vehicle – Securing the child restraint system
possible, downwards to the child restraint sys-
tem.
Fully retract the seat cushion length adjust-
#
ment.
Adjust the seat cushion inclination so that the
#
front edge of the seat cushion is in the highest
position and the rear edge of the seat cushion
is in the lowest position.
Set the seat backrest to the most vertical
#
position possible.
Activating or deactivating the special seat belt
retractor of the seat belt
& WARNING Risk of injury or death if a seat
belt is unfastened while the vehicle is in
motion
If the seat belt is released while the vehicle is
in motion, the special seat belt retractor is
deactivated and the child restraint system is
no longer correctly secured. The seat belt is
drawn in slightly by the inertia reel and cannot
be immediately closed again.
63
Advertisement
Table of Contents
