Table of Contents
Advertisement
176 Driving and parking
Press charging interruption button 3.
#
The charging process is ended. The % indi-
cator lamp
1
lights up white. The vehicle
socket is unlocked.
%
3
If charging interruption button
tive, you can alternatively unlock the vehicle
with the vehicle key or centrally from the
inside to terminate the charging process. If
the vehicle socket is unlocked for around
30 seconds, the %
light up white.
Press and hold button
#
cable connector and remove the charging
cable connector from the vehicle socket.
%
If you cannot remove the charging cable con-
nector, repeat the unlocking procedure. If the
charging cable connector is still locked, con-
tact a qualified specialist workshop.
Close the socket cover and the socket flap.
#
%
After the charging cable connector has been
disconnected, the % indicator lamp
the vehicle socket remains lit for some time
before switching off.
Starting the direct current charging process
(mode 4)
& DANGER Risk of death when charging at a
is inopera-
damaged socket
The charging process uses high voltage.
1
indicator lamp will
If the charging cable, the vehicle socket or the
mains socket are damaged, you could receive
an electric shock.
2
on the charging
Only use an undamaged charging cable.
#
Avoid mechanical damage such as crush-
#
ing, abrading or driving over the cable.
Have a damaged vehicle socket replaced
#
at a qualified specialist workshop as
soon as possible.
Never connect the charging cable to a
#
damaged vehicle socket.
1
on
* NOTE Damage due to overheating of
charging cable and charge port
During the charging process, the charging
cable and charge port can heat up within the
permissible limits.
The permissible limit values are influenced by
the following factors:
the power supply system and the charging
R
cable are not damaged
Advertisement
Table of Contents
