Printing With Phaserlink Printing Software - Tektronix Z740/N - Phaser 740 Color Laser Printer Software Manual

Chapter
4
Printing with PhaserLink
Printing Software
Printing to a remote printer using PhaserLink Printing Software is similar to printing
on any printer installed on your system, except for one extra step: after you select
the printer and click Print in your application's Print dialog box, the Print Redirector
appears.
1.
In your Windows application, select the Print command.
2.
In the Print dialog box, select the appropriate printer or group from the list
of printers.
3.
When the Print Redirector dialog box appears, modify the destination and
job parameters as necessary. See "Using the Print Redirector" on page 26
for more information.
4. To send the print job, click OK.
5. A message appears indicating that the print job was sent successfully.
N
O T E
If your print job is very large, you may have to break it up into smaller pieces and
send each piece separately. See the discussion of message size limits on page 17
for more information.
25
User Manual