Media Jams - Tektronix Phaser 740 User Manual

Media Jams

Preventing media jams
To reduce the frequency of media jams, use Tektronix
media and occasionally clean the rollers. See
page 32.
When using the Multi-Purpose Tray, always set the
media thickness switch for the media you are using.
See page 9.
If the printer frequently reports Jam at Multi-
Purpose, move the media thickness switch to a
thicker setting.
Locating a jam
The front panel reports Jam at <Location>.
The <Locations> are the sensors listed as
Line 2 of the front panel message directs you to the location
of the jam. For example:
Jam at A
Open left side door
A
D
A through E.
Multi-Purpose
B
E
Duplex Unit
26
C
33100-07