Tektronix Phaser 740 User Manual page 32

Jam at E
Solution 1
Remove the jammed media
from the output tray.
e r
e tt
A /L pe r
Pa
33100-15
Open and close the printer's front door to clear the error
message.
Solution 2
Pull open the access door
(above the plastic output tray)
and remove the media.
e r
e tt
A /L r
pe
Pa
33100-16
Jam at Multi-Purpose Tray
1 Remove all media in the
Multi-Purpose Tray.
2 Remove the jammed media
from the Multi-Purpose Tray.
Set the Media Thickness
3
switch for the media you are
using (page 9).
4 Re-insert the media in the
Multi-Purpose Tray.
Open and close the printer's front door to clear the error
message.
30
33100-17