Tektronix Phaser 740 User Manual page 14

Printing Envelopes
1 Prepare each envelope: tuck in the envelope flap.
2 Adjust the printer's media thickness switch to Thick.
3 Adjust the printer's media guides for the width of your envelopes.
4 Insert the envelopes (maximum capacity is 10-15, depending on
thickness):
Short end enters first .
Side to be printed is face-up .
The edge where you place the stamp enters the printer first in
some applications; make a test print before proceeding.
5 At the front panel prompt, scroll to Card or Envelope and press OK.
6 In the front panel's Printer Defaults menu, scroll to Multi-
Purpose Media and select #10 Envelope under Media Size.
1
2
3
4
12
33100-47