Tektronix Phaser 740 User Manual page 26

Symptom: In all four colors?
Prints are black (edge to edge).
All 4 colors are extremely faded.
or
Each page has a chipped
corner.
Solution: 1) Choice of media or
2) Replace Imaging Unit, or Fuser, or Fuser Roll or Main Charge Grid.
1 Remove, then re-insert the Main
Charge Grid.
2 Replace the Main Charge Grid.
33100-34
Hints
Use Tektronix media.
Use the correct media tray for
the media you are using.
When using the Multi-Purpose
Tray, select the correct media in
the front panel.
Relative humidity may be too low
(below 30% relative humidity).
24