Duplex Printing - Tektronix Phaser 740 User Manual

Automatic Duplex Printing
Automatic duplex printing requires that the Lower Tray Assembly
be installed.
1 Make sure that the Duplex Unit is inserted in the printer's
upper (a) slot.
Never put media in the Duplex Unit; the printer will report a
media jam.
2
2 Load 75 - 90 g/m (20 - 24 lb.) paper in the paper tray.
If you are using pre-printed paper, such as letterhead:
Place the first side to be printed face-down .
Place the top of the page under the paper tray's hooks.
This example shows letterhead paper.
3 Insert the paper tray in the printer's middle (b) or lower (c)
tray slots.
1
2
R
P E
P A
A 4
For best results with duplex printing,
2
use 90 g/m (24 lb.) laser paper.
16
a
b
x
p le
D u
pe r
Pa
c
e r
e tt
A /L pe r
Pa
l
g a
L e
pe r
Pa
33100-37