Tektronix Phaser 740 User Manual page 20

Manual Duplex Printing: Multi-Purpose Tray
Side 1
For a multi-page document, print odd-numbered pages for Side 1.
(This selection is application-specific).
1 Insert paper with the side to be printed face-up . This example shows
letterhead paper.
2 In the printer's front panel, select the media type at the prompt.
Front panel selection
Paper:
Coated Paper:
Card or Envelope:
3 In the Print screen (using a supported driver), select Multi-Purpose
Tray as the Paper Source or Tray Selection. Send the job to the
printer.
4 Remove the printed paper from the output tray.
Media type
Standard laser paper 90 - 105 g/m
Tektronix Glossy Coated paper
Card stock
Heavy laser paper 109 - 150 g/m
2
, 24 - 28 lb.
2
, 29 - 40 lb.
Two-sided printing on specialty media can
shorten component life.
1 2 3 4 5 6 7
For best results with duplex printing, use 90 g/m
(24 lb.) laser paper.
Duplex Printing
18
32564-06
2