Tektronix Phaser 740 User Manual page 27

Symptom: In all four colors?
Pieces of the printed image are
missing and reappear out of place,
approximately 129 mm (5 in.) down
the page.
or
Media frequently wraps around
the Fuser ( ).
Jam at C
Solution: 1)
2)
Hints
Use Tektronix media.
Print 10-20 blank pages of plain paper.
To avoid jams with Tektronix transparencies, make sure that the logo strip is
loaded face-down for the Multi-Purpose Tray and face-up for the transparency
tray.
Choice of media or
Replace Imaging Unit, or Fuser, or Fuser Roll or Main Charge Grid.
If , clear the media jam.
Jam at C
Print 10-20 blank pages to clean
the roller.
If you still see the problem,
replace the Fuser Roll.
If you still see the problem,
replace the Fuser.
25