When To Replace Components - Tektronix Phaser 560 User Manual

When to replace components

When the printer's front panel indicates that a component needs to be replaced, make sure that you
have replacements on hand. The printer may continue to print until the component is completely
used up; for the toner and Fuser Roll, the printer stops until you replace them. The Imaging Unit and
Fuser continue to print.
Printer component
T
ONER CARTRIDGES
I U
MAGING NIT
9698-51
9698-52
F
USER
9698-53
F R
USER OLL
9698-54
T K
RANSFER IT
9698-55
* These figures are based on an average of 5% coverage of the printable area for any one color using laser paper. The frequency
of replacement will vary, depending on the complexity of the prints, the percentage of coverage, and the type of media.
Transparencies, glossy coated paper, and other specialty media will result in shortened consumable life.
** The starter cartridges that are shipped with the printer have an average life of approximately 3,000 pages, based on an
average of 5% coverage.
Front panel message
<color> low
Change the color toner soon.
Stopped:
Replace:<color>
Change the color toner now.
Imaging Unit:replace
Change the Imaging Unit soon.
Imaging Unit expired
Change the Imaging Unit now.
Fuser:replace
Change the Fuser soon.
Fuser expired
Change the Fuser now.
Fuser Roll:replace
Change the Fuser Roll soon.
Stopped:
Fuser Roll:replace
Change the Fuser Roll now.
Transfer Kit:replace
Change the Transfer Kit now.
Caring for Your Printer
Average life* Order number
Black
10,000 pages
(CMY)**
Cyan
Magenta
12,000 pages Yellow
(Black)**
57,000 images
or
14,250 color pages
60,000 images
or
15,000 color pages
27,000 pages
110 Volt
220 Volt
30,000 pages
15,000 pages
15,500 pages
60,000 pages
User Manual
6
016-1536-00
016-1537-00
016-1538-00
016-1539-00
016-1523-00
016-1534-00
016-1535-00
016-1556-00
016-1533-00
6-3