Tektronix Phaser 560 User Manual page 112

4
Printing Basics
4-48
Phaser 560 Color Laser Printer
Envelopes
1.
Prepare each envelope in the following manner:
Tri-fold a letter-sized piece of paper and insert it into the envelope.
Tuck the envelope flap inside the envelope.
2. Adjust the printer's Media Thickness switch to Thick.
3. Adjust the printer's media guides for the width of your envelopes.
4. Insert the envelopes with the short end entering the printer first
and the side to be printed facing up; the edge where you place the
stamp enters the printer first.
5.
Fill the Multi-Purpose Feeder up to the level indicator on the
guide (maximum capacity is 10-15 envelopes, depending on
thickness).
6. In your application.
Create a document with the following measurements.:
Width
Length
Margins
Access the Page Setup menu and set the orientation to Landscape.
2
3
9698-44b
4.13 in. (104.1 mm)
9.5 in. (241,3 mm)
.25 in.