Tektronix Phaser 560 User Manual page 63

Setting up the Phaser 560 GX printer driver
Refer to the on-line manual on the printer's CD-ROM.
1.
Select Chooser from the Apple menu after installing the printer's software (page 3-18).
2.
Click on the icon of the Phaser 560 GX printer driver (on the left side of the Chooser).
3.
Click on the Zone for your printer. See your network administrator if you have questions.
4.
Select your printer from the list of printers on the right side of the Chooser. If it is not in the list, check
your hardware connections and which zone you have selected in the Chooser.
5.
In the Connect via field's pop-up menu, select your printer's communication method:
AppleTalk
Servers
6.
Click Create to create a desktop printer. An icon of the printer appears on the desktop.
7.
Close the Chooser.
Standard network connection
Shared desktop printer
Installing Printer Software
User Manual
3
3-21