Tektronix Phaser 560 User Manual page 134

5
Printing: Beyond the Basics
5-12
Phaser 560 Color Laser Printer
3.
Press the Menu button. The following message appears:
Check Print:enabled*
<----
Exit
The asterisk (*) indicates the current setting. By default,
Check Print is enabled. Pressing an arrow button toggles the
selection between enabled and disabled. Pressing the OK
button activates the new selection.
4.
To change the Check Print Timeout (the amount of time the printer
pauses before completing the print job), press the Menu button
when the front panel displays Check Print Timeout . The front
panel displays this message:
Check Print Timeout:5min*
<----
Exit
5. Press the arrow buttons to scroll through a list of pre-set timeouts:
1, 2, 5, 10, 20, 30 minutes, 1 hour, 8 hours, 24 hours, and Infinite.
The asterisk (*) indicates the current setting. Press OK to activate
your selection.
-----> OK
-----> OK
9008-43
9008-43