Tektronix Phaser 560 User Manual page 203

Macintosh users
Note If you are using QuickDraw GX and System Software 7.5, you
can download printer utilities from the Tektronix Phaser 560 GX
printer driver; refer to topics on the printer's CD-ROM or the
Tektronix World Wide Web site for instructions.
1. Follow the instructions starting on page 3-16 to install the utility
files from either the printer's CD-ROM or the Printer Software for
Macintosh diskette.
2.
Select the appropriate printer in the Chooser.
3. Locate the LaserWriter Utility in the PhaserTools folder on your
computer's hard disk, and double-click its icon to start the
application.
4.
Choose Download PostScript File from the Utilities menu.
5.
Select one of the following files from the list, then click Open.
(These files were installed in the Phaser 560 Utilities folder, inside
the PhaserTools folder.)
Select Setscreen On to enable setscreen operations.
Select Setscreen Off to disable setscreen operations.
6.
At the prompt Save PostScript output as: you are asked
for a file name for saving printer output. Use either the default
name given in the edit box or type a new name.
7.
Click Save to send the file to the printer.
8.
If no output is returned by the printer, the LaserWriter Utility
displays a dialog box; click OK to continue.
Troubleshooting
7-31
User Manual
7