Tektronix Phaser 560 User Manual page 120

4
Printing Basics
4-56
Phaser 560 Color Laser Printer
Double-sided printing from the Multi-Purpose Feeder
Caution
Use laser bond paper for duplexing; two-sided printing on specialty
media can shorten component life. For opacity and feed reliability,
use laser paper that is at least 100 g/m
results, do not use heavy toner coverage on Side 1.
S 1
IDE
1.
Place the paper in the Multi-Purpose Feeder with
the side to be printed face up. This example show
letterhead paper.
2. First, make these selections in the printer's front
panel:
Default Tray: Multi-Purpose
Media Type:
Paper
Note For a multi-page document, print odd-numbered pages for Side 1.
(This selection is application-specific).
3.
Then, make this selection in a supported driver and send the print
job:
Select the tray: Multi-Purpose
Tray*
*
This setting automatically selects the media type previously defined in the front panel.
4.
Remove the printed paper from the output tray.
2
(28 lb. bond). For best
Listed in the Printer Defaults menu.
Listed under Multi-Purpose Feeder in
the Printer Defaults menu.
Listed under Paper Source or Tray
Selection (depending on the driver).
1 2 3 4 5 6 7
32564-06