Tektronix Phaser 560 User Manual page 129

Calibrate Colors menu selections
Menu item*
Adjust light/dark
<---- ----> Menu
Lighter/Darker:+0
<---- ---->
Adjust each color
<---- ----> Menu
Color Reference Page
<---- ---->
Adjust <color>:
<---- ---->
Adjust <color>:+0
<---- ---->
Reset adjustments
<---- ---->
* An asterisk ( ) on the front panel selection indicates the current setting.
*
The following table shows the selections available in the Calibrate
Colors menu, along with a brief explanation of each function.
What it does
Lightens or darkens all toner
colors.
Lightens or darkens all toner
*
OK
colors.
The current Light/Dark setting
reflects the average value of
the four separate density
settings. Each increment
adjusts all four density values
up or down the same amount.
The available adjustment range
is limited so that no single color
exceeds the ±10 value limit.
Controls the color density for
each color independently.
Prints a sample of the current
Print density setting and a range of
settings for each color.
Enters the menu to calibrate a
Menu
single color.
Calibrates the indicated color.
*
OK
Resets the color calibration to
Menu
the default settings.
Printing: Beyond the Basics
How it works
Press the button.
Menu
To lighten colors, press the left arrow
button (the number decrements in
1-point steps); then press the
To darken colors, press the right arrow
button (the number increments in 1-point
steps); then press the
OK
Press the button.
Menu
Press the button.
Print
Press the button.
Menu
To lighten this color toner, press the left
arrow button (the number decrements in
1-point steps); then press the
To darken this color toner, press the right
arrow button (the number increments in
1-point steps); then press the
Press the button; then press the
Menu
button.
Confirm
User Manual
5
button.
OK
button.
button.
OK
button.
OK
5-7