Tektronix Phaser 560 User Manual page 45

6.
The Finish Installation dialog box contains instructions for completing the printer software setup;
click Next. The Add Printer Wizard program is automatically launched.
7.
In the Add Printer Wizard, click Next in the opening dialog box.
8.
Select your printer's connection, either Local Printer or
Network Printer, and click Next.
9.
In the Manufacturers/Printers dialog box, click Have Disk.
10.
Type in the drive for the CD-ROM or diskette, and click OK.
11.
Select your printer, and click Next:
Tektronix Phaser 560 (standard printer configuration)
Tektronix Phaser 560 Extended (Extended Features option)
If you are not sure which version of the printer you have, check the printer's startup page for
Extended Features: Yes or No.
12.
Select the port your printer is connected to, and click Next.
13.
Enter a name for the printer, and select the Phaser 560 as the default printer if desired, and click Next.
14.
Decide if you want to print a test page, Yes or No, and click Finish.
15.
In the Installation Completed dialog box, click Finish.
16.
You may see a Restart Windows dialog box if the system needs to update some files. Decide if you
want to restart now or later, and click OK.
Note
See the "Adobe PostScript Printer Driver User Guide" on the printer's CD-ROM
(USERGUIDE.PDF) for detailed information on the AdobePS 4 driver.
Installing Printer Software
User Manual
3
3-3