C
ONNECTING TO THE
Fiery EXP8000/50 on the network
C
N
ONNECTING TO THE
ETWORK
N
ETWORK
This chapter summarizes the stages in setting up the Fiery EXP8000/50.
When the Fiery EXP8000/50 is connected to a network, it behaves as a networked printer.
The Fiery EXP8000/50 supports the following network protocols (rules that enable
computers on a network to communicate with each other):
• AppleTalk
• TCP/IP, which also includes the BOOTP, DHCP, FTP, HTTP, IMAP, IPP, IPv4, IPv6,
LDAP, LPD, NBT, POP3, Port 9100, SMB, SMTP, SNMP, SNTP, and SSL/TLS
protocols
These protocols can run concurrently on the same cable. Computers that use other protocols
can print through a server that uses one of the supported protocols. The Fiery EXP8000/50 is
auto-sensing, and handles all connections simultaneously.
9