A
DMINISTERING THE
5 At the Log On to Windows dialog box, type Administrator in the user name field, type the
password, and then press Enter.
The password is case-sensitive and must be entered exactly.
6 Wait for FieryBar to appear on the monitor and reach Idle.
The Fiery EXP8000/50 takes approximately three minutes to power on and reach Idle.
F
EXP8000/50
TO RESTART THE
IERY
1 Verify that the Fiery EXP8000/50 is not receiving, processing, or printing any files.
If necessary, wait until Command WorkStation shows no processing or printing jobs in the
Active Jobs window, the FieryBar shows Idle in both the RIPping and Printing areas.
2 Close all open applications except FieryBar.
3 Right-click FieryBar and choose Restart Fiery from the menu that appears.
4 Click OK when the confirmation message appears
Wait for the Fiery EXP8000/50 server software to close down and restart. You may need to
wait one minute or more for the server software to restart. FieryBar displays the Exited status
while the server software restarts.
F
EXP8000/50
IERY
38