Reparing For Iery Exp8000/50 Setup; Fiery Exp8000/50 Setup; Levels Of Access And Control; Users And Groups - EFI DocuColor 5000 Configuration And Setup

P F EXP8000/50 S 14
REPARING FOR IERY ETUP
P F EXP8000/50 S
REPARING FOR IERY ETUP
To prepare for printing at your site, you must do some initial Fiery EXP8000/50
configuration (or "Setup") to specify the network environment and the types of printing you
do. Before you perform Setup, decide the levels of access to implement, such as passwords and
other security features that the Fiery EXP8000/50 offers. Because many of these security
features are interconnected, review the information in this chapter to plan for an effective
security system, and then perform Setup accordingly.

Levels of access and control

When you configure the Fiery EXP8000/50 during Setup, you (as system administrator)
implement a particular level of control by configuring these elements:

• Users and Groups

• Print connections
• Access to WebTools
Users and Groups
With the Configure application, you create users, assign passwords to users, create groups
with particular privileges, and assign users to the groups. Several groups are provided by
default, and you can create new groups. All users in a group have the same privileges.
In addition to assigning the users that you have created to a group, you can add users from
your organization's global address list if you have LDAP services enabled on the Fiery
EXP8000/50. For more information, see Configure Help.
Passwords
When you create new users, you assign passwords to them. In addition, you can also set
passwords for these areas:
• Default admin user in Administrators group
• Default operator user in Operators group
• Windows system password
The Administrator and Operator passwords are separate from the Windows system
N :
OTE
password.