Table of Contents
Advertisement
P
F
EXP8000/50 S
REPARING FOR
IERY
Fiery EXP8000/50 print connections
The Fiery EXP8000/50 supports three print connections: Hold queue, Print queue, and
Direct connection. You enable or "publish," these print connections to users on the network
when you configure Printer Setup. All published connections are constantly checked for the
presence of jobs. The Print queue and Direct connection give remote users more direct access
to the Fiery EXP8000/50 than the Hold queue. Therefore, do not publish the Print queue
and the Direct connection in environments where maximum control is required.
In addition, you can enable the Printed queue, which is a storage area for the most recent jobs
from the Print queue. The Printed queue allows you to reprint those jobs. In Setup, enable the
Printed queue and specify the maximum number of jobs to retain in the queue. To reprint
jobs in the Printed queue, use the job management tools (Command WorkStation).
To use the utilities and WebTools, you must enable at least one print connection.
N
:
OTE
Hold queue
Jobs sent to the Hold queue are spooled to the Fiery EXP8000/50 hard disk for printing at a
later time, or for reprinting. Because the Hold queue is a storage area, jobs sent to it cannot
proceed through the printing process until the operator intervenes using the job management
tools.
Print queue
The Print queue is the standard Fiery EXP8000/50 queue. Jobs sent to the Print queue are
processed and printed in the order in which they are received. Jobs prioritized by an operator
with the job management tools and jobs sent via the Direct connection take priority over jobs
sent to the Print queue.
Direct connection
The Direct connection transmits jobs directly to the Fiery EXP8000/50, but only when the
Fiery EXP8000/50 is idle. If the Fiery EXP8000/50 is busy, the job remains at the user's
computer until the Fiery EXP8000/50 is ready. The job is then processed as soon as the
previous job is finished and before the next queued job is processed.
Jobs sent to the Direct connection are not stored on the Fiery EXP8000/50 hard disk, and
cannot be selected for reprinting, moving, or deletion. Therefore, the Direct connection
provides a measure of security for sensitive files. Jobs sent to the Direct connection do appear
in the Job Log, for accounting purposes.
N
:
To download fonts to the Fiery EXP8000/50, you must publish the Direct connection.
OTE
WebTools
The Fiery EXP8000/50 supports Internet or intranet access with WebTools from Windows
and Mac OS computers. To enable use of WebTools, see
ETUP
"Configuring WebTools"
16
on page 25.
Advertisement
Table of Contents
