S
ETTING UP THE
Accessing Configure from a network computer
T
O ACCESS
T
O ACCESS
Using Configure
S
F
ETTING UP THE
IERY
F
EXP8000/50
IERY
To specify network settings and print option default settings, you must perform Setup. To use
any of the Setup applications, you must enter the Fiery EXP8000/50 Administrator password.
To set up the Fiery EXP8000/50 from a network computer, use Configure. You can access
Configure in these ways:
• WebTools from a supported Internet browser
• Command WorkStation, Windows Edition
C
I
ONFIGURE FROM AN
NTERNET BROWSER
1 Start your Internet browser and type the IP address of the Fiery EXP8000/50.
2 Click the Configure tab on the Fiery EXP8000/50 home page.
3 Click Launch Configure.
4 Log in as administrator with the Administrator password.
C
C
ONFIGURE FROM
OMMAND
1 Start Command WorkStation.
2 Log on as administrator with the appropriate password.
3 Choose Setup from the Server menu.
Regardless of the method you use, the following dialog box appears.
For information about using Configure and setting default options, see Configure Help.
EXP8000/50
FROM A NETWORK COMPUTER
FROM A NETWORK COMPUTER
W
S
, W
ORK
TATION
INDOWS
E
DITION
21