Cannot Connect To The Fiery Exp8000/50 With Command Workstation - EFI DocuColor 5000 Configuration And Setup

T
ROUBLESHOOTING

Cannot connect to the Fiery EXP8000/50 with Command WorkStation

If there is a problem connecting to the Fiery EXP8000/50, an error message is displayed.
The problem can occur when:
• The Fiery EXP8000/50 is initially turned on
• The Fiery EXP8000/50 restarts
• You have changed settings affecting the server address and have not reconfigured the
connection to the server
If you experience this problem, try the following solutions, in this order:
• A remote computer running utilities or WebTools may be interfering by obtaining status
information. If possible, close the remote application, and try to connect again.
• Restart the Command WorkStation software and try to connect again.
• Restart the Fiery EXP8000/50.
41