P
F
EXP8000/50 S
20
REPARING FOR
IERY
ETUP
T
O CONNECT TO THE NETWORK
• Connect the cable from the network to the appropriate network connector (RJ-45) on the
back of the Fiery EXP8000/50.
About Setup
Setup configures the Fiery EXP8000/50 to communicate with other devices and to manage
print jobs. Perform Setup the first time you turn on the Fiery EXP8000/50 after new system
software is loaded, or any time Server software is reinstalled. When the network or user
printing environment changes, change the options accordingly.
N
:
You cannot access Setup functions from Command WorkStation, Macintosh Edition.
OTE
To set up the Fiery EXP8000/50 from a network computer, use Configure. You can access
Configure either from WebTools or Command WorkStation, Windows Edition.